The unit’s serial plate can have incorrect electrical ratings which can lead to incorrect wirings being used, posing a fire hazard.

The front disc brake rotor and brake pads can be misaligned, which can cause brake failure, posing crash and injury hazards.

The screws that connect the plastic heel cup to the aluminum heel unit of the crampon can loosen and allow the heel cup to detach from the crampon, posing a fall hazard.

The roll-on warmer’s power cord can overheat and short circuit, posing fire, burn, and electrical shock hazards.

The recalled magnetic chess games, which include 20 magnet pieces, violate the mandatory federal toy magnet regulation because the set contains one or more magnets that fit within CPSC’s small parts cylinder, and the magnets are stronger than permitted. When high-powered magnets are swallowed, the ingested magnets can attract each other, or another metal object, and become lodged in the digestive system. This can result in perforations, twisting and/or blockage of the intestines, infection, blood poisoning and death.

The recalled mattresses violate mandatory federal flammability regulations for mattresses, posing a fire hazard to consumers.

When the recalled 3D printer’s heatbed cable is bent or damaged, it can short-circuit and spark or burn through the insulation layer, posing electric shock and fire hazards.

The recalled conditioner can contain bacteria, including Pseudomonas aeruginosa, an environmental organism found widely in soil and water. People with weakened immune systems or external medical devices who are exposed to Pseudomonas aeruginosa face a risk of serious infection that may require medical treatment. The bacteria can enter the body if inhaled, through the eyes, or through a break in the skin. People with healthy immune systems are usually not affected by the bacteria.

The recalled sling carriers violate the safety requirements of the Safety Standard for Sling Carriers, including requirements for structural integrity and occupant retention, posing a fall hazard to babies. Additionally, the sling carriers pose a suffocation hazard because they fail to meet the federal safety standard’s requirements for restraint systems as the waist restraint can be used without the crotch restraint. Further, there are no warnings or instructional literature providing information to caregivers about keeping the baby’s face clear to prevent suffocation or safe positioning to prevent the baby from curling into a position with their chin resting on or near their chest. Sling carriers manufactured after January 30, 2018 are subject to the mandatory federal safety standard.

The recalled light’s battery can overheat and ignite the light’s plastic housing, posing fire and burn hazards to consumers.

The biometric lock on the gun safes can be opened by unauthorized users, posing a serious injury hazard and risk of death.

The teeth of the recalled ascenders can fail to engage, making it difficult or impossible for the user to ascend.

The recalled engines can overheat, posing fire and burn hazards.

Infants can suffocate if they roll or move on the crib bumper in a position that obstructs breathing. Padded crib bumpers are banned under federal law.

The recalled cleaning product violates the Federal Hazardous Substances Act because it is deceptively labeled as “Safe to Use” and lacks the required cautionary statements for a poison, posing a risk of poisoning and chemical burns to consumers.

When the recalled bed rails are attached to an adult’s bed, users can become entrapped within the bed rail or between the bed rail and the side of the mattress. This poses a serious entrapment hazard and risk of death by asphyxiation.

The assembly instructions can cause consumers to incorrectly attach the bottom portion of the tiller/cultivator upside down, causing the tines to rotate toward the user, posing a laceration hazard.

The recalled drain covers do not conform to the entrapment protection standards of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing an entrapment hazard to swimmers and bathers.

Depending on the model, the surface heating elements can: 1) turn on spontaneously without being switched on; 2) fail to turn off after being switched off; or 3) heat to different temperatures than selected. This poses fire and burn hazards to consumers.

The detectors can fail to activate, posing a risk that consumers will not be alerted to a fire.

The recalled products contain either ethylene glycol or low-viscosity petroleum distillates, which must be in child-resistant packaging, as required by the Poison Prevention Packaging Act (PPPA). The packaging for the products is not child resistant, posing a risk of poisoning if the contents are swallowed by young children. Additionally, petroleum distillates can get into the lungs, causing chemical pneumonia and/or pulmonary damage, which can be fatal.

The oven door hinge can dislodge, releasing the spring, which can damage or break through the door trim, posing an impact injury hazard to consumers.

The pinwheel’s fastener cap can come loose and detach, posing a choking hazard to young children. 

The steering caps, which are used to hold the handlebar in place, can crack and cause the handlebars to become unstable, posing a crash hazard.

The fuel tank cap does not fit correctly, causing a fuel leak around the filler neck, posing a fire hazard.

The children’s robes violate the flammability standards for children’s sleepwear, posing a risk of burn injuries to children.

The recalled helmets do not comply with the positional stability requirements of the CPSC federal safety standard for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

The swivel chair’s base can break, posing a fall hazard.

The children’s nightgowns violate the flammability standards for children’s sleepwear, posing a risk of burn injuries to children.

The silicone cover on the sipper can detach while in use, posing a choking hazard to children.

The children’s pajama sets fail to meet the flammability regulations for children’s sleepwear, posing a risk of burn injuries to children.

The recalled dressers are unstable if they are not properly anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children. The dressers violate the performance requirements of the STURDY Act.

The snowmobile can leak fuel at the pump flange assembly, posing a fire hazard and risk of serious injury to the rider or passenger.

The recalled commercial refrigerators with Secop Compressors can fail in a manner causing the compressor to overheat, posing a fire hazard.

The improperly manufactured camshafts in the engines can cause the starter rope to suddenly retract when pulling to start, posing an injury hazard.

The recalled foam pattern rollers are intended for children and contain levels of lead that exceed the federal lead content ban in the rollers’ handles. Lead is toxic if ingested by young children and can cause adverse health effects.

Pieces from the recalled leaf blowers and vacuums can come loose inside the unit and be ejected, posing a laceration hazard to users and bystanders.

The recalled snowmobile’s drive clutch can break, allowing fragments to escape the snowmobile shielding, posing a laceration hazard.

When the recalled dog eyelid wipes are opened and in use, bacteria and fungi, which are organisms found widely in the environment, soil, and water, can be introduced and grow in the container, posing a risk of serious infection to people with weakened immune systems. Individuals with wounds may also be at higher risk of infection. People with healthy immune systems are not typically affected.

The recalled noise-reducing earmuffs can develop cracks in the colored portion of the plastic cups, posing a risk of overexposure to loud noise and sound.

The recalled log splitter’s hydraulic cylinder rod can separate from the piston, preventing the wedge from retracting. Reengaging the rod to the piston can cause the rod and wedge to move unexpectedly, posing injury hazards.

The mattress support pins can become loose and allow the mattress to fall, posing a fall hazard to children.

If the acceleration pedal on the battery-operated ride-on toy becomes clogged with debris, it can stick after the user’s foot is removed from the pedal, posing a crash hazard.

The helmets do not comply with the dynamic strength of retention system, impact attenuation and certification requirements of the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

An uncocked and loaded air rifle can discharge unexpectedly if jolted or dropped, posing an injury hazard.

The children’s pajamas fail to meet the flammability standards for children’s sleepwear, posing a burn hazard to children.

The helmets do not comply with the positional stability, dynamic strength of retention system, impact attenuation, and certification requirements in violation of the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

The portable fuel containers do not meet the child-resistant requirements for closures under the Children's Gasoline Burn Prevention Act (CGBPA). The closure for the products is not child resistant, posing a risk of burns and poisoning to children.

The bicycle's crank arms can loosen and/or detach from the crank/spindle, posing fall and injury hazards.