Enlarge / The Clip attached to a late-90s vintage mountain bike. (credit: Eric Bangeman)

Shortly after World War II, a French manufacturer by the name of Solex started selling mopeds. These were not your "typical" moped that looks kind of like a motorcycle with pedals—the mopeds made by Solex were essentially bicycles with a small, two-stroke engine mounted over the front wheel that could propel the rider around 100 km on a single liter of gas mixture. The downside: Solex mopeds were loud and cumbersome to ride due to the weight distribution, and they never really caught on in North America.

Clip, a startup based in Brooklyn, New York, has come up with its own twist on the Solex. Its only product, the eponymously named Clip, is a friction drive unit that attaches to the front fork of any bicycle, turning it into an e-bike. At $499 for the Commuter model and $599 for the Explorer, it is a relatively inexpensive way to turn just about any bicycle into an e-bike for a fraction of the cost of a new one.

The Clip mounts to the front fork just below the brake caliper. (credit: Eric Bangeman)

Weighing in at 8.8 lb (4 kg) for the Commuter model (the Explorer is a pound heavier), the Clip is at its essence a portable friction-drive. There's a detachable controller that mounts on the handlebar and the unit itself. The Explorer model, the one we reviewed, has a 192 Wh battery that takes an hour to fully charge. Its range is pegged at "up to 12 miles," a claim that is pretty accurate based on our testing, and the top speed is 15 mph. The Commuter model offers half the battery capacity, charge time, and range.

Enlarge / The Pedego Moto has serious moped energy. (credit: Eric Bangeman)

I'm not a fat-tire bike guy. My tire tastes run toward the thinner end of the spectrum: 28s on my road bike and 35s on my gravel bike. And I must confess to some distaste for fat-tire e-bikes, which I mostly encounter being ridden (and occasionally even pedaled) on local bike trails. But the $3,995 Pedego Moto caught my eye. The specs were impressive, but more importantly, it looked like it would be a blast to ride.

Unlike most of the other e-bikes I've reviewed, the Pedego Moto requires little assembly. The Moto arrived in a massive box strapped to a pallet, but once the box was cut away and the bike exposed, all I had to do was adjust the handlebars with a hex key and the Moto was good to go.

From the headlight to the bench seat, Moto sports a rugged moped vibe. There's a bright color display attached to the handlebars with four control buttons. The two on the front tweak the assist level and navigate setup screens, while the ones on the top and bottom handle power and confirm setup options. There's another controller just below and to the left of the display that handles the turn signals and headlights.